home *** CD-ROM | disk | FTP | other *** search
- ~~ English language file for mouse
- ~~ to test copy this file to mouse.lan and run mouse
- ~~ all strings can be up to 80 characters
-
- ~~ Rows = 1
- MSG_START
- Microsoft (R) Mouse Driver Version
-
- ~~ Rows = 1
- MSG_START_2
- Copyright (C) Microsoft Corp. 1983-1995. All rights reserved.
-
-
- ~~ Rows = 3
- MSG_ERR_PARM
- Invalid command line parameter '%s'. Correct the command line.
- Type Mouse /? for a list of acceptable switches.
-
-
-
- ~~ Rows = 3
- MSG_ERR_NOTFND
- Microsoft Mouse not found, try another 9 or 25 pin serial port
- and/or check for interrupt conflicts with other peripherals.
- Type Mouse /f to check all ports.
-
-
-
-
- ~~ Rows = 3
- MSG_ERR_INTRPT_MISS
- Interrupt conflict. Change the J4 jumper on the InPort Bus board.
- See the Microsoft Bus Mouse Installation Card for instructions on
- changing the jumper.
-
- ~~ Rows = 1
- MSG_ERR_INTRPT_MULT
- Interrupt conflict. Change the jumper on the InPort card
-
- ~~ Rows = 1
- MSG_END_MSX
- $
-
- ~~ Rows = 1
- MSG_END
- Mouse driver installed
-
- ~~ Rows = 1
- MSG_SWT
- Switch values passed to existing driver
-
- ~~ Rows = 1
- MSG_ENABLED
- Mouse driver re-enabled
-
- ~~ Rows = 1
- MSG_REMOVED
- Existing driver removed from memory
-
- ~~ Rows = 1
- MSG_DISABLED
- Mouse driver disabled but remains resident
-
- ~~ Rows = 1
- MSG_ERR_REMOVED
- Mouse driver is not resident in memory
-
- ~~ Rows = 2
- MSG_ERR_CHG_PORT
- Changes have been written to your MSINPUT.INI file.
- You MUST restart your computer for changes to take effect.
-
- ~~ Rows = 1
- MSG_ERR_INSTALLED
- Driver already installed
-
- ~~ Rows = 1
- MSG_CNTL_NO_DSBL
- Unable to disable driver -- Control Panel is active
-
- ~~ Rows = 1
- MSG_MENU_NO_DISBALE
- Unable to disable driver -- Mouse Menu is active
-
- ~~ ROWS = 1
- MSG_NOT_SUPPORTED
- Mouse driver installed. Parameters /U, /E, /X no longer supported.
-
- ~~ ROWS = 3
- MSG_ERR_INDOSBOX
- The mouse driver for MS-DOS cannot be loaded from an MS-DOS session
- within Windows. Exit Windows to load the mouse driver for MS-DOS.
-
-
- ~~ Rows = 23
- MSG_MOUSE_SW_INFO
-
- mouse [options]
- on Enables Mouse
- off Disables Mouse
- /B Bus Mouse Type
- /Cn Serial Mouse on Com (1,2)
- /E Load Mouse in low memory
- /F Find pointing device
- /Hn Horizontal Sensitivity(5-100)
- /In Inport Mouse Type(1,2)
- /KPnSm Button Selection, P-primary,S-secondary (1-4)
- /K ClickLock - /KC (on), /K (off)
- /Mn Enables Default Cursor - /M1 (on), /M (off)
- /Nn Cursor Delay(0-10)
- /Or Rotation Angle (0-359)
- /Q Load driver quietly(No Display)
- /Rn Interrupt Rate (1-4)
- /Sn Horizontal and Vertical Sensitivity(5-100)
- /Vn Vertical Sensitivity(5-100)
- /Y Disables Hardware Cursor
- /Z PS2 Mouse Type
-
-
-
-
-
- ~~ The following four strings should only be 15 characters.
- ~~ Rows = 1
- AccelProfile1Str
- Low
-
- ~~ Rows = 1
- AccelProfile2Str
- Medium
-
- ~~ Rows = 1
- AccelProfile3Str
- High
-
- ~~ Rows = 1
- AccelProfile4Str
- Unaccelerated
-
-
- ~~ Rows = 1
- GeneralEnableStr
- enabled
-
-
- ~~ Rows = 1
- SerialEnableStr
- enabled on COM
-
-
- ~~ Rows = 1
- InPortEnableStr
- enabled on InPort
-
-
-
- ~~ Rows = 1
- BUSNAMESTRING
- Bus Mouse
-
- ~~ Rows = 1
- SERIALNAMESTRING
- Serial Mouse
-
- ~~ Rows = 1
- SERIALBALLPOINTNAMESTRING
- Serial BallPoint Mouse
-
- ~~ Rows = 1
- SERIALEASYBALLNAMESTRING
- Serial EasyBall
-
- ~~ Rows = 1
- PS2NAMESTRING
- Mouse Port Device
-
- ~~ Rows = 1
- PS2BALLPOINTNAMESTRING
- Mouse Port BallPoint Device
-
- ~~ Rows = 1
- PS2PHOENIXFLAGSTRING
- PhoenixBIOS
-
- ~~ Rows = 1
- PS2EXTENDEDBIOSSTRING
- FailIfNoExtendedBIOS
-
- ~~ Rows = 1
- FALSESTRING
- FALSE
-
- ~~ Rows = 1
- TRUESTRING
- TRUE
-
- ~~ Rows = 1
- PENNAMESTRING
- Pen Tablet
-
- ~~ Rows = 1
- INPORTNAMESTRING
- InPort Mouse
-
- ~~ Rows = 1
- HPMOUSENAMESTRING
- HPMOUSE Mouse
-
- ~~ Rows = 1
- HPMOUSEBALLPOINTNAMESTRING
- HPMOUSE BallPoint Mouse
-
- ~~ Rows = 1
- DEVICESTRING
- Device
-
- ~~ Rows = 1
- MOUSESTRING
- Mouse
-
- ~~ Rows = 1
- BALLPTSTRING
- Ballpoint
-
-
-
- ~~ ROWS = 0
-